9pm — 9" woofer plus midrange
Use for: cafés, jam sessions, practice, jazz with unamplified horns, recording studios, intimate stages.
16.25" H x 11" W x 11.875" D Approx. 29lbs weight
175 watts @ 8ohms; Sensitivity: 90db F3: 49Hz F6: 39Hz Upper end: 8.5kHz
Standard look: black taurus tolex, red/black fade (cab on the right)
Two Speakon-1/4" Combo Jacks, in parallel
10pm — 10" woofer plus midrange
Use for: small to medium stages, in all genres. Extremely expressive and touch-sensitive.
Shown in standard look and colors.
22.375" H x 13" W x 16.125" D Approx. 35lbs weight
350 watts @ 8ohms. Sensitivity: 92db F3: 52Hz F6: 40Hz Upper end: 6.5kHz
Standard look: black taurus tolex, red/black fade
Two Speakon-1/4" Combo Jacks, in parallel
10x — 10" woofer, special design
Use for: small to medium stages, in all genres. Stack with 10pm for a "play anywhere" stage volume and impact. More conventional tone, but Trudeep depth and authority.
18.25" H x 13" W x 16.125" D Approx. 26lbs weight
350 watts @ 8ohms. Sensitivity: 94db F3: 59Hz F6: 46Hz Upper end: 3.6kHz
Shown in custom look
Two Speakon Combo-1/4" Jacks, in parallel
12am — 12" woofer and midrange
Use for: medium to larger stages, in all genres. With good FOH, this should be all you need for stage sound. Provides the percussive impact of a Trudeep 10" Stack in a single cabinet.
26.375" H x 15.25" W x 17.75" D Approx. 48lbs weight
400 watts @ 8ohms. Sensitivity: 95db F3: 47Hz F6: 38Hz Upper end: 8kHz
Shown in custom wine/sunset look
Two Speakon Combo-1/4" Jacks, in parallel
Two 9pm's stacked
Incredibly deep and percussive for a stack that's less than 3ft/1m high. Equals the output of one 10pm, for use on small stages, or with loud bandmates.
Take one for coffee houses and accoustic jazz. Take both for loud music in smaller spaces.
Options include matched continuous fades and other custom tweaks to the look.
10pm/10pm stacked
10pm/10x (shown on the left)
10x/10x
Double the loudness and percussive attack with two 10pm's stacked.
This combination will serve from medium to larger stages, even outdoor stages.
Take a single 10pm for regular gigs and the stack for when you need to dial up something extra.
Shown with 9pm stack on the left, and 10pm stack on the right. All custom options available for the stack. 10x stack, not shown.
Fine joinery, premium materials. Lightweight marine plywood with nice grain patterns. Interior birch plywood vents are precision cut, bent, and fiberglass reinforced.
Integral bracing for a rigid cab, essential for low-end reproduction.
Audio-quality electronic components, with iso-elastic mounts in their own enclosures. Point-to-point handwired. All tested for QA/QC.
All finishes water-based, from transparent dyes to 7 layers of acrylic clearcoat on colored woods.